BALLUFF感应式传感器

BALLUFF感应式传感器
优势
非接触，无磨损，耐脏， 防短路
可提供从直径3 mm至80x80 mm 的六面体结构
BES G06ED-POC40F-BP02
Keyfeatures
Size                                   D06.5
Connection                             Cable, 2m, PUR
Switching output / function           PNP/Normally closed (NC)
Operating voltage                       10...30 V DC
Mechanical installation condition     Non embeddable
Rated operating distance Sn           4 mm
General attributes
Ready delay tv max.                 20 ms
Utilisation category                 DC 13
Switching freq. f max.                 1500 Hz
Temp. drift max. (% of Sr)           10 %
Repeat accur. R max. (% of Sr)     5 %
Power indicator                       No
Basic standard                       IEC 60947-5-2
Function indicator                 Yes
Short-circuit protected                 Yes
Enclosure Type per IEC 60529           IP68 according to BWN PR 20
Protection class                       II
Protected against polarity reversal     Yes
Protected against miswiring           Yes
Additional text                       The sensor is functional again after the overload has been eliminated.
                                     Unshielded: See installation instructions for inductive sensors with extended switching distance 853924.
BALLUFF感应式传感器
Electrical attributes
Output resistance Ra                 33.0k + D
Rated operating voltage Ue DC           24 V
Effective operating current Ie     200 mA
Rated insulation voltage Ui           250 AC
Rated short circuit current           100 A
Electrical version                 DC, direct current
Hysteresis H max. (in % of Sr)     15 %
Minimum operating current Im           0 mA
Load capacitance max. (at Ue)           0,5 μF
No-load current Io damped max.     3 mA
Max. no-load cur. Io undamped           10 mA
Off-state current Ir max.           10 μA
Ripple max. (% of Ue)                 15
Switching output                       PNP
Switching function                 Normally closed (NC)
Voltage drop static max.           2,5 V
Principle of operation                 Inductive
Operating voltage                       10...30 V DC
Mechanical attributes
Ambient temperature                 -25...70 °C
Number of conductors                 3
Assured operating distance Sa           0...3,2 mm
Cable short designation                 Li9Y11Y
Cable length                       2 m
Conductor cross-section                 0.14 mm2
Eff. switching distance Sr           4 mm
Shock rating                       Shock, half-sinus, 30 gn, 11ms
Vibration rating                       55 Hz, 1 mm ampl., 3x30 min
Degree of contamination                 3
Sensing surface material           PBT
Housing material                       Stainless steel
Cable jacket material                 PUR
Cable diameter D max.                 3,1 mm
Tolerance Sr                       ±10 %