BALLUFF巴鲁夫电容式传感器
电容式传感器可直接或通过容器壁探测 目标以及所有材料(包括不导电材料)、 液体、颗粒、粉末的料位。
优势
非接触、无磨损、无反作用、输出信号 无反弹
传感器更换便捷,无需密封 容器
BCS00AM BCS M30TTM1-POC20C-ET02
Keyfeatures
Connection Cable, PUR
Trade name / Technology Standard
Working range 1...20 mm
Size M30
Mechanical installation condition Flush (shielded)
Special properties PTFE housing
Switching output / function PNP/Normally closed (NC)
General attributes
Mechanical installation condition Flush (shielded)
Series M30
Enclosure Type per IEC 60529 IP66/IP64 on cable output
Switching freq. f max. 100 Hz
Temp. drift max. (% of Sr) 20 [-5..+55 °C]
Repeat accur. R max. (% of Sr) 5 %
Power indicator Yes
Function indicator Yes
Short-circuit protected Yes
Protected against polarity reversal Yes
Protected against miswiring Yes
Utilisation category DC 13
Basic standard IEC 60947-5-2
Scope of delivery 2 nuts
Electrical attributes
Connection type Cable
Electrical version DC, direct current
Operating voltage 10...35 V DC
Ripple max. (% of Ue) 10
Switching output PNP
Switching function Normally closed (NC)
Effective operating current Ie 300 mA
Rated insulation voltage Ui 75 V DC
Hysteresis H max. (in % of Sr) 15 %
Voltage drop static max. 1,8 V
Mechanical attributes
Rated operating distance Sn 20 mm
Number of conductors 3
Conductor cross-section 0.34 mm2
Housing material PTFE
Sensing surface material PTFE
Cover material PTFE
Cable jacket material PUR
Ambient temperature Ta min. -30 °C
Ambient temperature Ta max. 70 °C
Working range Sa max. 20 mm
Working range Sa min. 1 mm
Diameter d1 M30x1.5
Mounting length 65 mm
Tightening torque 0.5 Nm
BALLUFF巴鲁夫电容式传感器